|
Product Specifications
 |
Every Greenjacket Cover is
Quality-Tested After Production |
Greenjacket protective covers are manufactured of polyurethane for a flexible, field trimmable cover with high dielectric strength and durability.
Typical product specifications are as follows*:
|
Colour:
|
Green Standard (custom colours are available)
|
Test Properties:
| Tensile Strength |
ASTM D-412 |
2306 psi (15.9 MPa) |
| Elongation at Break |
ASTM D-412 |
170% |
| Tear Strength |
ASTM D-1004 |
319 pLi (56 Nmm) |
| Taber Abrasion |
ASTM D-1044 |
<2 mg loss, 1000 cycles
CS-17 wheel, 1 kg load |
| Hardness |
|
44 shore D, 97 shore A |
| Electrical Resistance |
ASTM D-1048-99 |
25 KV-AC @ 125 mil thickness |
Properties After 1000 hr. Accelerated Weathering:
| Tensile Strength |
ASTM D-412 |
1566 psi (10.8 MPa) |
| Elongation at Break |
ASTM D-412 |
110% |
| Electrical Resistance |
ASTM D-1048-99 |
25 KV-AC @ 125 mil thickness |
Temperature Stability:
Maximum Recommended Service
Temperature for Continuous Use: |
150C (300 F) |
Maximum Service Temperature for
Short-Duration Temperature Elevation (a few minutes): |
200C (390 F) |
| Melting Point: |
250C (480 F) |
*The information given above is representative data obtained from tests commissioned by Cantega Technologies Inc. ("Cantega"). Although the data is, to the best of Cantega's knowledge, reliable, Cantega cannot assume any liability related to the data provided, or to decisions made based on the data provided.
|
